Clean the filter, then run a hot empty cycle
Nearly every front-loading machine has a pump filter behind a small hatch at the bottom front. This is the step people skip for a decade. Put down towels and a shallow tray, because water will come out — more than you expect. Unscrew the filter slowly, let it drain, pull it out, remove the fluff and coins and lost sock fragments, rinse it under the tap, and screw it back in firmly.
Only then run the maintenance wash: an empty drum, the hottest cycle your machine offers, with either a dedicated washing machine cleaner or a scoop of your normal powder detergent. Powder matters here — it is more effective at shifting the greasy biofilm than liquid, which is partly what caused the problem in the first place. Check your manual before reaching for vinegar, as some manufacturers advise against it on rubber and metal components. Wipe the seal dry when the cycle finishes.
The habits that stop it coming back
Leave the door and the detergent drawer ajar between washes. This single change does more than any product, because the drum can only dry out if air reaches it. If small children or pets make an open door impractical, close it after a few hours rather than straight away.






