Second, clean the rubber seal with a cloth wrung out in warm water, then run your finger around it. It should feel soft and springy. If it feels dry and chalky, a very light wipe of a silicone-based rubber conditioner keeps it flexible through the cold months; avoid oily or solvent-based products, which can make rubber swell or perish.
How often do window tracks really need doing?
Twice a year is plenty for most homes — once in spring after the pollen has finished, and once in autumn before the heating season begins. If you live on a busy road, above a building site, or you open your windows wide every day in summer, you will see the difference by doing the bottom channel of the most-used windows quarterly. It takes about five minutes per window once the big clean is behind you.
What should I do about black spots on the window seal?
Small spots of mould on a seal usually mean condensation is sitting there overnight rather than anything structural, and they can often be wiped back with a dedicated mould cleaner used exactly as the label instructs, with the window open and gloves on. Afterwards, tackle the cause: wipe the morning condensation off the glass and frame, keep trickle vents open, and air the room properly for a few minutes each day. If mould keeps returning over a large area, or anyone in the house has asthma or other breathing issues, get a professional to look at the ventilation rather than scrubbing it again and again.











